Blaupunkt BRISBANE SD48 7 648 000 310 - Adjusting E-XBASS

Press the or button 2 repeatedly
until "X-BASS" appears on the display.
Press the
button 2 to call up the
submenu.
"X-BASS" and the currently set value are
displayed.
Press the
or button 2 repeatedly
until the desired setting appears on the
display.
When you have fi nished making your chang-
es,
press the MENU button >.
To exit the menu,
press the ESC button <.
Adjusting E-XBASS
In the "E-XBASS" submenu, you can also ad-
just the cut-off frequency in addition to the
X-BASS boost. You can select whether the
increase should affect the entire X-BASS
frequency range (setting "FLAT") or pur-
posefully only one of three X-BASS frequen-
cies (400 Hz, 800 Hz, 2400 Hz).
Press the MENU button >.
The display shows "MENU".
Press the
or button 2 repeatedly
until "AUDIO" appears on the display.
Press the
button 2 to call up the
audio menu.
"BASS" appears on the display.
Press the
or button 2 repeatedly
until "ENHANCED" appears on the dis-
play.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Press the
button 2 to call up the
submenu.
"E-BASS" appears on the display.
Press the
or button 2 repeat-
edly until "E-XBASS" appears on the
display.
Press the
button 2 to call up the
submenu.
"GAIN" and the currently set value are dis-
played.
Press the
or button 2 to select
between "GAIN" (X-BASS boost) and
"FREQ" (frequency).
Press the
or button 2 to change
the selected setting.
When you have fi nished making your chang-
es,
press the MENU button >.
To exit the menu,
press the ESC button <.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
70
X-Bass
02_Brisb_VictoriaSD48_gb.indd 7002_Brisb_VictoriaSD48_gb.indd 70 23.11.2007 16:13:42 Uhr23.11.2007 16:13:42 Uhr