13
ENGLISH
DIM
Switching automatic adjustment of display bright-
ness ti the ambient lighting on or off. Settings:
ON, OFF.
Press the button
2 / 3 to change
between the settings.
SPRM
Only possible in MP3 and WMA mode: Switch-
ing the Supreme function on or off. Settings: ON,
OFF.
Press the button
2 / 3 to change
between the settings.
The Supreme function results in a sound improve-
ment for tracks coded at a low bitrate. The low
bitrate results in capping the upper frequency
range during the coding. For playback, the Su-
preme function recalculates the upper frequency
range and subsequently expands the sound spec-
trum. For tracks with high or variable bitrate or
with little salient upper frequency range, the Su-
preme function allows only minor sound improve-
ment.
NAME SET
Possible only in AUX mode: Selecting names for
the AUX input. Settings: AUX, TV, VIDEO, GAME,
PORTABLE, DVD.
Press the AUD button 9 for approx. 2 sec-
onds.
Press the button
2 / 3 to change
between the settings.
Note:
The menu is automatically exited 10 seconds
after the last button press.
The AUX mode is selected under the defi ned
name.
쏅
쏅
쏅
쏅
SWPRE
Possible only if the "NO SRC" mode is selected:
Adjusting the preamplifi er output. Settings: R
(for external amplifi er), SW (for subwoofer).
Press the button
2 / 3 to change
between the settings.
With the setting "R", the full frequency spectrum
is available at the preamplifi er output. With the
setting "SW", you can adjust a low-pass fi lter for
a connected subwoofer (see the chapter "Sound
settings", section "Adjusting the low-pass fi lter for
the subwoofer").
AUX
Possible only if the "NO SRC" mode is selected:
Adjusting the AUX input. Settings: OFF (AUX
mode is not selectable), ON1 (AUX mode is se-
lectable), ON2 (AUX mode is selectable, volume
reduction on; see below).
Press the button
2 / 3 to change
between the settings.
For the setting "ON2": If the device is switched off
in AUX mode, it is initially at low volume when it
is switched on again ("ATT ON", volume reduction
on). Turn the On/Off button
4 clockwise by one
increment to reactivate the previously adjusted
volume ("ATT OFF", volume reduction off).
CD READ
Possible only if the "NO SRC" mode is selected:
Adjusting the CD playback. Settings: 1 (for audio
CDs and MP3/WMA CDs), 2 (for audio CDs only).
Press the button 2 / 3 to change
between the settings.
With the setting "1", the device recognises audio
CDs as well as MP3/WMA CDs and plays them.
With this setting, copy-protected CDs can fre-
quently not be played. With the setting "2", the
device recognises only audio CDs and does not
play any MP3/WMA CDs. With this setting, many
copy-protected CDs can also be played.
쏅
쏅
쏅
User settings
01_BuenosAires200_us_gb.indd 1301_BuenosAires200_us_gb.indd 13 14.11.2008 13:24:41 Uhr14.11.2008 13:24:41 Uhr
To Next Page
Loading...
