Blaupunkt Buenos Aires 200 - Radio Mode; Preamplifier Output Settings; Radio Mode Operations

7
ENGLISH
Placing the device in operation Radio mode
Preamplifi er output
This device features a preamplifi er output.
Settings for the preamplifi er output:
Chapter "User settings", section "Perform-
ing settings in the user menu", menu item
"SWPRE"
Chapter "Sound settings", section "Adjusting
the low-pass fi lter for the subwoofer".
•
•
Radio mode
Changing to radio mode
Press the On/Off button 4 repeatedly until
"FM"/"AM" appears.
Selecting the memory bank
(FM1, FM2, FM3, AM)
Press the FM button > repeatedly until
the desired FM memory bank (FM1, FM2,
FM3) appears.
- or -
Press the AM
button = to select the AM
memory bank.
Note:
Up to six stations can be stored in each mem-
ory bank.
Tuning into a station
The buttons 2 / 3 allows tuning into sta-
tions manually or by using automatic seek tuning
or changing between stored stations. First, ad-
just the desired function in the user menu (see
the chapter "User settings", section "Performing
settings in the user menu", menu item "AUTO1 /
AUTO2 / MANUAL").
Starting station seek tuning
(setting "AUTO1")
Press the button
2 / 3 briefl y to tune
into the next receivable station.
Adjusting stations manually
(setting "MANUAL")
Press the button
2 / 3 briefl y once
or several times to change the frequency in
increments.
Press and hold down the button
2 / 3
to quickly change the frequency.
쏅
쏅
쏅
쏅
쏅
쏅
01_BuenosAires200_us_gb.indd 701_BuenosAires200_us_gb.indd 7 14.11.2008 13:24:40 Uhr14.11.2008 13:24:40 Uhr