14
User settings Additional functions
Setting the time
If necessary, press the DISP button <
repeatedly until the time is displayed.
Press the
DISP button < for approx. 2 sec-
onds.
Press the button AM
=/ FM > to
adjust the hours.
Press the button
2 / 3 to adjust the
minutes.
Briefl y press the
DISP button <.
쏅
쏅
쏅
쏅
쏅
Additional functions
External audio sources
Connecting external audio sources
You can connect external audio sources, such as
portable CD players, MiniDisc players, MP3 play-
ers, via the FRONT-AUX-IN socket
8 (AUX input)
and play them back in AUX mode via the loud-
speakers of the car sound system.
Changing to AUX mode
Press the On/Off button
4 repeatedly until
"AUX" appears.
Notes:
You can switch off the AUX input if no other
external audio source is connected (see
the chapter "User settings", section "Per-
forming settings in the user menu", menu
item "AUX").
You can select a different name for the AUX
input than "AUX" (see the chapter "User
settings", section "Performing settings in
the user menu", menu item "NAME SET").
Restoring factory settings
Press the reset button : with a pointed ob-
ject (e.g. a pin or the tip of a ball-point pen).
Factory settings in the user menu:
DIM OFF MONO OFF
SWPRE R SCL OFF
SPRM ON AUX ON1
DEMO OFF CD READ 1
쏅
•
•
쏅
01_BuenosAires200_us_gb.indd 1401_BuenosAires200_us_gb.indd 14 14.11.2008 13:24:42 Uhr14.11.2008 13:24:42 Uhr
To Next Page
Loading...
