Blaupunkt Buenos Aires 200 - Subwoofer and Loudspeaker Settings; User Settings; User Menu Navigation; Radio Station Tuning Modes

12
If necessary, briefl y press the AUD button 9
to select the "V-OFF" menu item.
Turn the On/Off button
4 to perform the
setting.
Briefl y press the MENU button ? to exit the
menu.
Adjusting the low-pass fi lter for the
subwoofer
This is possible only if the setting SWPRE SW is se-
lected in the user menu. Settings: THRU (no low-
pass fi lter), 80H (Hz), 120H (Hz), 160H (Hz).
Press the AUD button 9 for approx. 2 sec-
onds.
The "LPF" menu item is selected.
Turn the On/Off button
4 to perform the
setting.
Briefl y press the MENU button ? to exit the
menu.
Adjusting the loudspeaker type
Adjust the loudspeaker type connected to the
device to optimise the sound. Settings: SP OFF
(no type selected), SP 5/4 (loudspeaker with 4 or
5 inch diameter), SP 6*9/6 (loudspeaker with
6 or 6x9 inch diameter), SP OEM (original Blau-
punkt loudspeaker).
If necessary, press the On/Off button
4
repeatedly until "NO SRC" is selected.
Briefl y press the AUD button 9.
Turn the On/Off button
4 to change be-
tween the settings.
Briefl y press the AUD button 9 to exit the
menu.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
User settings
Calling and exiting the user menu
Press the MENU button ? for approx. 2 sec-
onds to open the menu.
Press the button AM
=/ FM >
repeatedly until the desired menu item is
selected.
Perform the setting (see the next section).
Briefl y press the MENU button to exit the
menu.
Performing settings in the user menu
AUTO1 / AUTO2 / MANUAL
Possible only in radio mode: Select the mode for
setting stations. Settings: AUTO1 (station seek
tuning), AUTO2 (changing between stored sta-
tions), MANUAL (adjusting the frequency manu-
ally).
Press the button
2 / 3 to change
between the settings.
CRSC
Possible only in FM radio mode: Switch automatic
mono playback for radio stations on or off in case
of poor reception. Settings: ON, OFF.
Press the button
2 / 3 to change
between the settings.
SCL
Switching automatic display of text as scrolling
text on or off. Settings: AUTO (On), MANU (Off).
Press the button
2 / 3 to change
between the settings.
DEMO
Switching demo mode on or off. Settings: ON,
OFF.
Press the AUD button 9 for approx. 2 sec-
onds to change between the settings.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Sound settings User settings
01_BuenosAires200_us_gb.indd 1201_BuenosAires200_us_gb.indd 12 14.11.2008 13:24:41 Uhr14.11.2008 13:24:41 Uhr