32
Radio mode
Storing stations or calling stored
stations
쏅 Select the desired memory bank.
쏅 If necessary, set the desired station.
쏅 Press a station button
<
for approx. 2 sec-
onds to store the current station under the
button.
- or -
쏅 Brie y press a station button
<
to call up the
stored station.
Scanning stations
The scan function is used to scan every receivable
station of the current waveband.
Note:
You can adjust the scan time for each sta-
tion (see the chapter "User settings", section
"Making settings in the "VARIOUS" menu",
menu item "SCAN TIME").
쏅 Press the MENU button
=
for approx. 2 sec-
onds to start scanning.
During the scan, the display alternately dis-
plays "SCAN" and the current frequency as
well as memory bank or station name.
쏅 Brie y press the MENU button
=
to con-
tinue listening to the station that is currently
being received.
Storing stations automatically
(Travelstore)
With Travelstore, you can automatically search for
and store the 5 FM stations o ering the strongest
reception in the region in one memory bank. Any
previously stored stations in this memory bank are
deleted in the process.
With Travelstore, you can store 5 FM stations in
the FMT memory bank in all reception areas.
In the reception areas "USA", "S-AMERICA" and
" THAILAND", you can also store 5 AM stations in
the AMT memory bank.
쏅 Select a memory bank of the desired wave-
band, e. g. FM1 or AM.
쏅 Press the SRC button
1
for approx. 2 sec-
onds.
The tuner starts the automatic station seek
tuning; the display shows "FM TSTORE" or
"AM TSTORE". After the storing is completed,
the radio plays the station at memory location
1 of the FMT or AMT level.
Notes:
• For the reception area "EUROPE": If the
priority for tra c information is switched
on (
), only tra c information stations
are stored.
• If the FMT or AMT memory bank is deac-
tivated (see the chapter "User settings",
section "Making settings in the "TUNER"
menu", menu item "TUN BAND"), it is au-
tomatically reactivated if you initiate the
Travelstore function.
PTY
In the reception areas "EUROPE" and "USA", an
FM station can transmit its current programme
type, e. g. CULTURE, POP, JAZZ, ROCK, SPORT or
SCIENCE. Hence, the PTY function allows a target-
ed search for broadcasts of a certain programme
type, e. g. for rock or sports broadcasts. Note that
PTY is not supported by all stations.
Note:
The PTY function is only available if it has been
activated (see the chapter "User settings", sec-
tion "Making settings in the "TUNER" menu",
menu item "PTY").
Selecting a programme type
쏅 Brie y press the
/ button
7
.
The currently selected programme type is
brie y displayed, and you can select a di er-
ent programme type.
쏅 If necessary, press the
/ button
7
re-
peatedly until the desired programme type
is selected.
To Next Page
Loading...
