EasyManua.ls Logo

Blaupunkt Concept Pro II - Inserting;Removing a Memory Card; Selecting Tracks; Selecting a Folder (Only in MP3;WMA Mode); Fast Searching

Blaupunkt Concept Pro II
372 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35
ENGLISH
Inserting/removing a memory card
Inserting a memory card
Switch o the car sound system so that the
memory card will be correctly registered.
Open the cover of the card slot
>
.
Insert the memory card with its labelled side
up and its contacts  rst into the card slot
>
until it clicks into place.
Close the cover of the slot again.
Turn on the car sound system.
After switch-on, the device automatically
selects the inserted memory card as audio
source. The data of the memory card are read.
Afterwards, the playback starts in MP3 mode.
Notes:
If the inserted memory card cannot be
played, "SD ERROR" is brie y displayed.
The time required for reading in the data
depends on the design and size of the
memory card.
Removing the memory card
Switch o the car sound system so that the
memory card will be correctly unregistered.
Open the cover of the card slot
>
.
Push on the memory card until it disengages.
Pull the memory card out of the card slot.
Close the cover of the slot again.
Selecting tracks
Press the / button
7
brie y to change
to the previous/next track.
Note:
If the current track plays longer than 3 sec-
onds, pressing
7
once restarts the track.
Selecting a folder
(only in MP3/WMA mode)
Press the / button
7
brie y to change
to the previous/next folder.
Fast searching
Press and hold down the button /
7
until the desired position has been reached.
Interrupting playback
Press the 3
<
button to interrupt the
playback ("PAUSE") or to continue it.
Scanning all tracks
The scan function scans all available tracks.
Press the MENU button
=
for approx. 2 sec-
onds to start the scan, or brie y to continue
playing the currently scanned track.
During the scan, the display alternately dis-
plays "PLAY SCAN" and the playing time of
the current track.
Note:
The scan time can be adjusted (see the chap-
ter "User settings", section "Making settings
in the "VARIOUS" menu", menu item "SCAN
TIME").
Playing tracks in random order
Press the 5 MIX button
<
to change among
the playback modes:
Operation Display Meaning
CD MIX ALL Mixing tracks
MP3/
WMA
MIX DIR
Mixing tracks of
the current folder
MIX ALL
Mixing tracks of
the data carrier
Gen. MIX OFF Regular playback
If the MIX function is switched on, the icon
MIX (mix all tracks) or MIX
(mix tracks of
current folder) is shown on the display.
CD/MP3/WMA mode
02_Detroit2024_gb.indd 35 13.06.13 15:58

Table of Contents

Related product manuals