EasyManua.ls Logo

Blaupunkt Cupertino 220 - Audio Input and Sound Settings; External Audio Input (AUX); Sound Configuration Options

Blaupunkt Cupertino 220
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
CD/MP3/WMA/iPod mode | External audio sources | Sound settings
Fast browsing
Fast browsing enables faster access to tracks. In-
stead of the arrow keys
7
, you use the volume
control
4
and the On/O button
3
to select
and con rm list entries:
Function Browse
mode
Fast browse
mode
Selecting
entries in lists
/
7
Volume
control
4
Con rming
entries
7
On/o
button
3
Return to the
higher level
7
7
Fast browsing is switched on or o in the user
menu (see the chapter "User settings", section
"Making settings in the "VARIOUS" menu", menu
item "BROWSE").
Note:
With activated fast browsing, you cannot
change the volume in browse mode or mute
the car sound system. To do so,  rst exit
the browse mode by pressing the button
1 LIST
;
or 2 ID3
;
or starting the track
playback.
External audio sources
Front AUX-IN socket
Danger!
Increased risk of injury from
connector.
In case of an accident, the protruding connector
in the front AUX-IN socket may cause injuries. The
use of straight plugs or adapters leads to an in-
creased risk of injury.
For this reason, we recommend using angled jack
plugs, e. g. the Blaupunkt accessories cable (7 607
001 535).
As soon as an external audio source, such as a
portable MP3 player is connected to the front
AUX-IN socket
:
, it can be selected with the SRC
button
=
. "AUX" then appears on the display.
Sound settings
The following sound settings can be changed in
the "AUDIO" menu:
Adjusting bass and treble
Setting the left/right volume distribution
(Balance) or front/rear (Fader)
Selecting a sound pro le (Presets)
Adjusting the switch-on delay for connected
ampli ers
Calling and exiting the "AUDIO"
menu
Brie y press the MENU
2
button to open
the user menu.
Press the
/ button
7
repeatedly until
the "AUDIO" menu item is selected.
Press the
button
7
to open the "AUDIO"
menu.
Press the
/ button
7
repeatedly until
the desired menu item is selected.
Perform the setting (see the next section).
Brie y press the MENU button
2
to exit the
menu.
Notes:
The menu is automatically exited approx.
16 seconds after the last button activation
and you are returned to the display of the
current audio source.
In the menu, you can press the button
7
in each case to return to the higher
menu level.

Table of Contents

Related product manuals