18
Note:
When you set the time in 12-hour mode
( H-MODE 12), an "A" is displayed before the
time for the time before noon or a "P" for the
time after noon.
Making settings in the "VARIOUS"
menu
DEMO
Switching the demo mode on or o . Settings:
ON, OFF.
쏅 Turn the volume control
4
to perform the
setting.
In demo mode, the features of the radio are shown
as scrolling text on the display.
BROWSE
Switching fast track selection in browse mode on
or o using the volume control
4
and the On/O
button
3
. Settings: ON, OFF.
쏅 Turn the volume control
4
to perform the
setting.
SCAN
Setting the scan time in seconds. Settings:
4/8/12/16/60 SEC.
쏅 Turn the volume control
4
to perform the
setting.
VERSION
Displaying the version of the CPU and software of
the radio.
쏅 Press the
button
7
to open the menu.
쏅 Press the
/ button
7
to toggle between
the display of the version number of CPU (P)
and software (E).
NORMSET
Restoring the original factory settings of the car
sound system.
쏅 Press the
button
7
to open the menu.
쏅 Press the
button
7
to con rm restoring
the factory settings.
The car sound system switches o and is re-
set to the factory settings. If a CD has been
inserted in the CD drive, the car sound system
automatically switches on again.
Factory settings
Important factory settings in the user menu:
Menu item Factory setting
AREA EUROPE
FM1 / FM2 / FMT ON
MW* / LW* OFF
AM** / AMT** OFF
RDS ON
REG* OFF
TRAF* OFF
SENS HI
PTY OFF
ON VOLUME LAST VOL
TA VOL* 20
BEEP ON
BROWSE ON
SCAN 8 SEC
DIM MAN
H-MODE 24
SET 00:00
* Only in reception area "EUROPE"
** Only in reception areas "USA", "S-AMERICA" and
"THAILAND"
In the user menu, you can restore the original
factory settings of the car sound system (see the
chapter "User settings", section "Making settings
in the "VARIOUS" menu", menu item "NORMSET").
User settings | Factory settings
To Next Page
Loading...
