8
Radio mode
in the "TUNER" menu", menu item "BAND"
(band selection)). Deactivated memory
banks are skipped during the source selec-
tion with the SRC button
=
Tuning into a station
There are various ways of tuning into a station:
Tuning into stations manually
쏅 Brie y press the
/ button
7
once or
several times to incrementally change the
frequency.
Starting station seek tuning
쏅 Press the
/ button
7
for approx. 2 sec-
onds to start station seek tuning.
The radio tunes into the next receivable
station.
Notes:
• For the reception area "EUROPE": In the FM
waveband, only tra c information stations
are tuned into if the priority for tra c infor-
mation (
) is switched on.
• The sensitivity of seek tuning can be ad-
justed (see the chapter "User settings",
section "Making settings in the "TUNER"
menu", menu item "SENS").
• If PTY is switched o , you can also start
station seek tuning by pressing the
/
button
7
.
Storing stations or calling stored
stations
쏅 Select the desired memory bank.
쏅 If necessary, set the desired station.
쏅 Press the station button 1 - 5
;
for approx.
2 seconds to store the current station under
the button.
- or -
쏅 Brie y press the station button 1 - 5
;
to call
up the stored station.
Scanning stations
With the scan function, you can scan either every
receivable station or the stored stations of the cur-
rent waveband.
Note:
You can adjust the scan time for each sta-
tion (see the chapter "User settings", section
"Making settings in the "VARIOUS" menu",
menu item "SCAN").
Scanning receivable stations
쏅 Press the MENU button
2
for approx. 2 sec-
onds to start scanning.
During the scan, the display alternately dis-
plays "SCAN" and the current frequency as
well as memory bank or station name.
쏅 Brie y press the MENU button
2
to con-
tinue listening to the station that is currently
being received.
Scanning stored stations
쏅 Press the / button
7
for approx. 2 sec-
onds to start scanning.
During the scan, the display shows the mem-
ory location and the current frequency or sta-
tion name.
쏅 Brie y press the
/ button
7
to continue
listening to the station that is currently being
scanned.
Storing stations automatically
(Travelstore)
With Travelstore, you can automatically search for
and store the 5 FM stations o ering the strongest
reception in the region in one memory bank, Any
previously stored stations in this memory bank are
deleted in the process.
With Travelstore, you can store 5 FM stations in
the FMT memory bank in all reception areas.
In the reception areas "USA", "S-AMERICA" and
" THAILAND", you can also store 5 AM stations in
the AMT memory bank.
쏅 Select a memory bank of the desired wave-
band, e. g. FM1 or AM.
To Next Page
Loading...
