16
쏅 Turn the volume control
4
to change among
the settings.
If priority is switched on for tra c information, the
display shows the icon
.
BAND (band selection)
Activating or deactivating memory banks.
Memory banks that can be deactivated:
Region Memory banks
EUROPE FM2, FMT, MW, LW
USA FM2, FMT, AM, AMT
S-AMERICA FM2, FMT, AM, AMT
THAILAND FM2, FMT, AM, AMT
Settings in each case: ON, OFF.
쏅 Press the
button
7
to open the menu.
쏅 Press the
/ button
7
repeatedly until
the desired memory bank is displayed.
쏅 Turn the volume control
4
to toggle be-
tween the settings ON (activate memory
bank) and OFF (deactivate memory bank).
Deactivated memory banks are skipped during
the source selection with the SRC button
=
.
Notes:
• In the factory default, all AM memory
banks are deactivated.
• If a memory bank is deactivated, the sta-
tions stored in this memory bank are re-
tained.
REG
(only for reception area EUROPE)
Only possible in FM radio mode: Switching
REGIONAL function on or o . Settings: ON, OFF.
쏅 Turn the volume control
4
to change be-
tween the settings.
SENS
Setting the sensitivity of station seek tuning. Set-
tings: LO (low), HI (high).
쏅 Turn the volume control
4
to change be-
tween the settings.
RDS
Switching the RDS function on or o . Settings: ON,
OFF.
쏅 Turn the volume control
4
to change be-
tween the settings.
PTY
Switching the PTY function on or o . Settings: ON,
OFF.
쏅 Turn the volume control
4
to change be-
tween the settings.
PTY TYPES
Only possible with activated PTY function: Select
a programme type.
쏅 Turn the volume control
4
to select a pro-
gramme type.
PTY LANG
(only for reception area EUROPE)
Select the language for the display of the pro-
gramme types. Settings: ENGLISH, DEUTSCH (Ger-
man), FRANCAIS (French).
쏅 Press the
button
7
to open the menu.
쏅 Turn the volume control
4
to select a lan-
guage.
AREA (reception area)
Select the reception area for the radio reception.
Settings: EUROPE, USA, S-AMERICA, THAILAND.
쏅 Press the
button
7
to open the menu.
쏅 Press the
/ button
7
to select a recep-
tion area.
쏅 Press the
button
7
to set the reception
area.
쏅 Press the
button
7
to con rm the select-
ed reception area.
User settings
To Next Page
Loading...
