Navigation Function | Phone Feature
Setting
Several settings are available to may your ride safer and
comfortable. Like the Speed alert and the safety
camera alert. Please keep them checked for a good
ride. You can also deactivate the options by
unchecking them.
In case of error
In normal condition, the error of satellite signal
reception is about 7 meters, while in several situations,
some error may still occur after the auto-correcting of
the software, at these moments, the driver should pay
attention to the road condition and drive according to
the actual road condition.
Note: Using environment of navigation
system can be complicated and varying, the
system operation may have some issues (such
as failing to enter the map interface, no image
e t c . ) w h e n e n c o u n t e r e d b y a l a rg e
electromagnetic disturbance. It will require a
re-start operation to deal with these issues.
11
Phone Feature
Please be aware that using a hand-held phone while
driving is an offence. You can use this device to make &
receive calls hands-free. However, it is suggested to
make minimal use of this feature & talk only when
required. Talking while driving may divert your
attention from traffic conditions ahead.
Making a call via Bluetooth
For the rst time to pair the mobile and the unit, it is
required to operate as below instructions:
Ÿ Turn the Bluetooth of the mobile on;
Ÿ Search the Bluetooth device with the mobile or the
unit, and connect - Device name is Jamaica 970;
Ÿ A prompt message will show on the mobile, input
the password 0000 and Conrm on the mobile;
Ÿ After pairing successfully, the system will enter the
interface below:
Ÿ
ü After the unit is powered off and on, the Bluetooth
of the unit will connect to the mobile last
disconnected.
ü Device name and the pin to connect is available on
the interface
lt is required to turn on the function "Visible to all
nearby Bluetooth devices" on the mobile & then
the unit will be able to nd the mobile Bluetooth
device.
Phone Icon
To Next Page
Loading...
