09
Ÿ The Bal and Fad reading will be displayed on the top
right of the screen.
Ÿ Once you have achieved your desired setting touch
the return tab to return to the previous menu. It’s
recommended to leave the Balance/Fader at 0-0.
Ÿ You can also use the Touch the button 5 to raise
level & 6 button to lower the level of the subwoofer
pre-out.
Navigation Function
This device is equipped with navigation on board.
Insert the mSD card (sold separately) into the map slot
and type your destination. Follow turn-by-turn voice-
guided commands to get to your destination hassle-
free.
Because of the rapid development of the urban
construction and the road planning, the navigation
map company constantly updates the navigation map.
If the route directed by the navigation map is found to
not conform with the actual road condition or the
actual traffic control condition, please drive the car as
per the actual road condition, traffic control and traffic
rules.
Steps to open the navigation:
Ÿ Insert SD card in the Navigation Slot before
installation
Ÿ Touch the icon [Navigation] in the main interface to
enter the navigation interface.
Ÿ Enter the desired destination using the input keys.
Ÿ Once destination is set, the system will plan the
route and begin navigating.
Navigation Icon
Sound Setting | Navigation Function
To Next Page
Loading...
