Blaupunkt Kingston MP35 User Manual

64
Amplifier/sub-out
(only Kingston MP35)
The car sound system provides connec-
tions that allow you to connect external
amplifiers. You can also connect an
amplifier to the device's integrated low-
pass filter to drive a subwoofer. The
amplifiers must be connected as de-
scribed in the installation instructions.
Setting the colour of the
display illumination
You can adjust the colour of the display
illumination to suit the illumination of
your vehicle cockpit. The primary col-
ours red, green and blue (R-G-B) are
available for this.
Setting a colour for the display
illumination
➮ Press the MENU button 7.
➮ Press the or button 6 repeat-
edly until “DISP COL” appears in
the display.
➮ Press the or button 6.
The menu for adjusting the colours is
displayed. “R”, “G” and “B” are displayed
with the current values. The “R” setting
flashes.
➮ Press the or button 6 repeat-
edly until the setting that you want
is displayed after “R”.
➮ Press the or button 6 to
move the selection cursor to the
position after the other colours (“G”
or “B”).
➮ Adjust the other colours to suit your
preferences.
When you have finished adjusting the
setting,
➮ Press the MENU button 7 twice.
The settings are saved.
AMPLIFIER/SUB-OUT
DISPLAY ILLUMINATION

Blaupunkt Kingston MP35 Specifications

General

Brand	Blaupunkt
Model	Kingston MP35
Category	Car Receiver
Language	English