26
Press the
or button 8 to switch
between the modes.
When you have fi nished making your
changes,
press the MENU button ;.
Displaying the time continuously
when the device is off and the
ignition is on
To display the time when the device is off
and the vehicle ignition is on,
press the MENU button ;.
Press the
or button : repeatedly
until "CLOCK OFF" or "CLOCK ON" ap-
pears on the display.
Press the
or button 8 to switch
the display between CLOCK ON and
CLOCK OFF.
When you have fi nished making your
changes,
press the MENU button ;.
쏅
쏅
쏅
쏅
쏅
쏅
Sound
You can adjust the sound settings (bass,
middle and treble) separately for each
source (radio, CD, CD changer, AUX, and
telephone/navigation). The volume distri-
bution settings (balance and fader) and
X-BASS apply to all the audio sources ex-
cept for telephone/navigation. You can ad-
just the volume distribution settings sepa-
rately for telephone/navigation.
Note:
The settings of the sound for telephone/
navigation can only be made during a
telephone call/voice output.
Adjusting the bass
You can select 1 of 4 middle frequencies
(60 Hz, 80 Hz, 100 Hz, 200 Hz). In ad-
dition, you can adjust the level between
-7 and +7 for the selected bass frequency.
Adjusting bass frequency and level
Press the AUD button <.
"BASS" appears on the display.
Press the
or button : once to
reach the BASS submenu.
Press the
or button 8 repeatedly
until the desired bass frequency ap-
pears on the display.
Press the
or button : to adjust
the level between -7 and +7.
Press the AUD < button twice to exit
the menu.
쏅
쏅
쏅
쏅
쏅
Clock - Time Sound
To Next Page
Loading...
