30
Equaliser presettings
(Presets)
This device features an equaliser in which
the settings for the music genres "ROCK",
"POP" and "CLASSIC" are already pro-
grammed.
To select an equaliser setting,
press the AUD button <.
"BASS" appears on the display.
Press the
or 8 repeatedly until
"POP", "ROCK", "CLASSIC" or "EQ OFF"
appears on the display.
Press the
or button : to select
one of the settings or select "EQ OFF"
to switch off the equaliser.
When you have fi nished making your
changes,
press the AUD button <.
Note:
Without Equaliser presets, you can ad-
just the bass and treble up to +7.
If you selected an Equaliser preset
(POP, ROCK, CLASSIC), the adjust-
ment of bass and treble is only limited.
For example, the preset POP only al-
lows for an audible treble adjustment
up to +3.
쏅
쏅
쏅
쏅
Adjusting the display
settings
Adjusting the display brightness
If your car sound system is installed as de-
scribed in the installation instructions and
your vehicle features the corresponding
connection, the display brightness for day
and night is switched by switching on the
vehicle lighting. The display brightness can
be adjusted separately for day and night in
increments from 1 - 9.
Press the MENU button ;.
Press the
or button : repeatedly
until "DIM DAY" or "DIM NIGHT" appears
on the display.
Press the
or button 8 to open the
menu.
Press the
or button 8 to switch
between the brightness levels.
When you have fi nished making your
changes,
press the MENU button twice ;.
쏅
쏅
쏅
쏅
쏅
Equaliser presettings Display
To Next Page
Loading...
