28
Setting the left/right volume
distribution (balance)
To adjust the left/right volume distribution
(balance),
press the AUD button <.
"BASS" appears on the display.
Press the
or button 8 repeatedly
until "BAL" appears on the display with
the current setting.
Press the
or button : to adjust
the balance (right/left).
Press the AUD < button to exit the
menu.
Adjusting the front/rear volume
distribution (fader)
To adjust the front/rear volume distribution
(fader),
press the AUD button <.
"BASS" appears on the display.
Press the
or button 8 repeatedly
until "FADER" appears on the display
with the current setting.
Press the
or button : to adjust
the volume distribution front/rear.
Press the AUD < button to exit the
menu.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Preamplifi er output
(Preamp-Out/Sub-Out)
You can use the preamplifi er outputs
(Preamp-Out) of the car sound system to
connect external amplifi ers. In addition,
you can connect an amplifi er for operating
a subwoofer to the integrated dynamic low-
pass fi lter of the device (level and cutoff fre-
quency can be adjusted).
For this purpose, the amplifi ers must be
connected as described in the installation
instructions.
Adjusting the sub-out level
The sub-out level can be adjusted in 8 incre-
ments (0 to +7).
Press the AUD button <.
"BASS" appears on the display.
Press the
or button 8 repeat-
edly until "SUBOUT" appears on the
display.
Press the
or button : once to
reach the SUBOUT submenu.
Press the
or button : to adjust a
value between 0 and +7.
When you have fi nished making your
changes,
press the AUD button < twice.
쏅
쏅
쏅
쏅
쏅
Sound Preamplifi er output
To Next Page
Loading...
