31
ENGLISH
Setting the display illumination
colour
For the display illumination, you can mix a
colour from the RGB spectrum (red green
blue) or select a colour during a colour
seek.
Mixing a colour for the display
illumination
To customise the display illumination to suit
your tastes you can mix a colour yourself
using the three primary colours red, green
and blue.
Press the MENU button ;.
Press the
or button : repeat-
edly until "DISP COL" appears on the
display.
Press the
or button 8 to open the
menu.
The menu for mixing your own colour is dis-
played. "R", "G", and "B" are displayed with
the current values. The setting for "R" is ac-
tivated.
Press the
or button : repeat-
edly until the desired colour value is
displayed.
Press the
or button 8 to move the
selection marker to the position after
the other colours.
Adjust the other colour components to
suit your preferences.
When you have fi nished making your
changes,
press the MENU button twice ;.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Selecting a display illumination during a
colour scan
Press the MENU button ;.
Press the
or button : repeat-
edly until "COL SCAN" appears on the
display.
Press the
or button 8 to start the
colour seek.
The device starts changing the display illu-
mination colour.
To select the currently set colour,
press the MENU button ;.
To start the seek tuning again,
press the
or button 8.
If you found the desired colour,
press the MENU button twice ;.
쏅
쏅
쏅
쏅
쏅
쏅
Display
To Next Page
Loading...
