29
ENGLISH
Adjusting the sub-out cutoff
frequency
You can select 1 of 4 settings: 0 Hz (linear),
80 Hz, 120 Hz and 160 Hz.
Press the AUD button <.
"BASS" appears on the display.
Press the
or button 8 repeat-
edly until "SUBOUT" appears on the
display.
Press the
or button : once to
reach the SUBOUT submenu.
Press the
or button 8 repeatedly
until the desired frequency appears on
the display.
When you have fi nished making your
changes,
press the AUD button < twice.
쏅
쏅
쏅
쏅
쏅
X-BASS
X-Bass allows you to increase the bass at
low volume.
The selected X-Bass setting is effective for
all audio sources (radio, CD, CD changer or
AUX).
The X-BASS increase can be set in incre-
ments of 1 to 3.
"XBASS OFF" means that the X-BASS func-
tion is switched off.
Adjusting the X-BASS boost
Press the XBASS button 7.
"X-BASS" appears on the display.
Press the
or button : once to
reach the X-BASS menu.
Press the
or button : repeatedly
until the desired setting appears on the
display.
When you have fi nished making your
changes,
press the XBASS button 7.
쏅
쏅
쏅
쏅
Preamplifi er output X-BASS
To Next Page
Loading...
