15
ENGLISH
Setting the scanning time
Press the MENU•OK button 5.
Press the
or button 4 repeat-
edly until "SCAN TIME" appears on the
display.
Press the
button 4 to open the
menu.
Set the desired scan time with the
or
button 4.
When you have fi nished making your chang-
es,
press the ESCAPE button <.
Note:
The defi ned scanning time is also ap-
plied by the system to scanning carried
out in CD and CD-changer as well as
MP3 mode.
Confi guring the display
In radio mode, you can choose between
various display options.
Frequency
Memory location and time
To switch between the display options,
press the DISP button ;.
쏅
쏅
쏅
쏅
쏅
•
•
쏅
CD mode
You can use this device to play standard
audio CDs, CD-Rs and CD-RWs with a diam-
eter of 12 or 8 cm.
Caution!
Labelled or shaped CDs can dam-
age the CD drive.
Do not insert any shape CDs.
Do not attach labels to CDs since the
label may detach during operation.
Note:
Label CDs only by using a marker since
it does not contain any caustic materi-
als. Permanent markers can damage
CDs.
To ensure proper functioning, use only CDs
with the Compact-Disc logo. Copy-pro-
tected CDs can cause playback problems.
Blaupunkt cannot guarantee the proper
functioning of copy-protected CDs!
Besides being able to play audio CDs on this
device, you can also play CDs containing
MP3/WMA music fi les. For further informa-
tion, please read the chapter entitled "MP3/
WMA mode".
Switching to CD mode
If there is no CD inserted in the drive,
press the
button 1.
The control panel opens.
Gently insert the CD with its printed
side uppermost into the drive until you
feel some resistance.
The drive draws in the CD automatically.
•
•
쏅
쏅
Radio mode CD mode
01_LondonMP48us_gb.indd 1501_LondonMP48us_gb.indd 15 11/20/07 9:56:32 AM11/20/07 9:56:32 AM
To Next Page
Loading...
