Blaupunkt London MP48 - Sound Settings Adjustment; Bass Level and Frequency Adjustment

28
Press the button 4 to open the
menu.
The menu for mixing your own colour is dis-
played. "R", "G", and "B" are displayed with
the current values. The setting for "R" is
activated.
Press the
or button 4 repeat-
edly until the desired colour value is
displayed.
Press the
or button 4 to move the
selection marker to the position after
the other colours.
Adjust the other colour components to
suit your preferences.
When you have fi nished making your chang-
es,
press the ESCAPE button <.
Selecting a display illumination during a
colour scan
Press the MENU•OK button 5.
Press the
or button 4 repeat-
edly until "COL SCAN" appears on the
display.
Press the
button 4 to start the
colour seek.
"SCANNING" is displayed. The device starts
changing the display illumination colour.
To select the currently set colour,
press the MENU•OK button 5.
To start the seek tuning again,
press the
button 4.
If you found the desired colour,
press the ESCAPE button <.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Activating/deactivating demo
mode
In demo mode, the functions of the device
are shown on the display as scrolling text.
The constant colour change demonstrates
the setting options of the display colours.
Pressing any button interrupts the demo
mode for a few seconds.
Switching on the demo mode
Switch off the device by pressing the
On/Off button 6.
Hold the buttons 1 9 and DISP ;
pressed at the same time and switch
on the device again with the On/Off
button 6.
"DEMO" briefl y appears on the display.
Switching off the demo mode
Switch off the device by pressing the
On/Off button 6.
Hold the buttons 1 9 and DISP ;
pressed at the same time and switch
on the device again with the On/Off
button 6.
The demo mode is switched off.
쏅
쏅
쏅
쏅
Display
01_LondonMP48us_gb.indd 2801_LondonMP48us_gb.indd 28 11/20/07 9:56:34 AM11/20/07 9:56:34 AM