27
ENGLISH
Equalizer presettings
(presets)
This device features an equalizer in which
the settings for the music genres "ROCK",
"POP" and "CLASSIC" are already pro-
grammed.
To select an equalizer setting,
Press the AUD > button.
"BASS" appears on the display.
Press the
or 4 repeatedly until
"POP", "ROCK", "CLASSIC" or "EQ OFF"
appears on the display.
Press the
or button 4 to select
one of the settings or select "EQ OFF"
to switch off the equalizer.
When you have fi nished making your chang-
es,
press the AUD > button.
Note:
Without Equalizer presets, you can
adjust the treble and bass up to +7.
If you selected an Equalizer preset
(POP, ROCK, CLASSIC), the adjust-
ment of bass and treble is only limited.
For example, with the preset POP, the
treble adjustment is audible only up to
+3.
쏅
쏅
쏅
쏅
Adjusting the display
settings
Adjusting the display brightness
If your car sound system is installed as de-
scribed in the installation instructions and
your vehicle features the corresponding
connection, the display brightness for day
and night is switched by switching on the
vehicle lighting. The display brightness can
be adjusted separately for day and night in
increments from 1 to 9.
Press the MENU•OK button 5.
Press the
or button 4 repeatedly
until "DIM DAY" or "DIM NIGHT" appears
on the display.
Press the
button 4 to open the
menu.
Press the
or button 4 to switch
between the brightness levels.
When you have fi nished making your chang-
es,
press the ESCAPE button <.
Setting the display illumination
colour
For the display illumination, you can mix a
colour from the RGB spectrum (red green
blue) or select a colour during a colour
seek.
Mixing a colour for the display
illumination
Press the MENU•OK button 5.
Press the
or button 4 repeat-
edly until "DISP COL" appears on the
display.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Equalizer presettings Display
01_LondonMP48us_gb.indd 2701_LondonMP48us_gb.indd 27 11/20/07 9:56:34 AM11/20/07 9:56:34 AM
To Next Page
Loading...
