25
ENGLISH
Adjusting treble frequency and level
Press the AUD > button.
"BASS" appears on the display.
Press the
or button 4 repeatedly
until "TREBLE" appears on the display.
Press the
button 4 once to reach
the TREBLE submenu.
Press the
or button 4 repeatedly
until the desired treble frequency ap-
pears on the display.
Press the
or button 4 to adjust
the level between -7 and +7.
Press the AUD button < twice to exit
the menu.
Note:
If an Equalizer preset (POP, ROCK,
CLASSIC) is selected, the manual in-
crease of the treble level does not re-
sult in an audible change starting at a
certain setting. For further information,
please read the note in the section enti-
tled "Equalizer presettings (presets)".
Setting the left/right volume
distribution (balance)
To adjust the left/right volume distribution
(balance),
press the AUD > button.
"BASS" appears on the display.
Press the
or button 4 repeatedly
until "BAL" appears on the display with
the current setting.
Press the
or button 4 to ad-
just the left/right volume distribution
(RIGHT/LEFT).
Press the AUD button > to exit the
menu.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Adjusting the front/rear volume
distribution (fader)
To adjust the front/rear volume distribution
(fader),
press the AUD > button.
"BASS" appears on the display.
Press the
or button 4 repeated-
ly until "FADER" appears on the display
with the current setting.
Press the
or button 4 to adjust
the front/rear volume distribution
(REAR/FRONT).
Press the AUD button > to exit the
menu.
쏅
쏅
쏅
쏅
Sound
01_LondonMP48us_gb.indd 2501_LondonMP48us_gb.indd 25 11/20/07 9:56:34 AM11/20/07 9:56:34 AM