29
ENGLISH
External audio sources
The device features two AUX-IN sockets
(REAR-AUX and FRONT-AUX) to which you
can connect external audio sources such
as portable CD players, MiniDisc players or
MP3 players.
REAR-AUX input at the rear of
the device
You can connect either a Blaupunkt CD
changer or an external audio source to the
REAR-AUX input. A Blaupunkt CD changer
is automatically recognised and is then
available as audio source. To be able to se-
lect an external device as audio source, the
REAR-AUX input must be switched on in the
Audio menu (AUX ON).
Notes:
An adapter cable is needed to connect
an external audio source to the REAR-
AUX input. You can obtain this cable
(Blaupunkt no.: 7 607 897 093) from
your Blaupunkt dealer.
AUX INPUT can be selected only if no
CD changer is connected to the de-
vice.
The REAR-AUX input can be selected with
the SRC button 2. "AUX INPUT" then ap-
pears on the display.
Switching the REAR-AUX input on/off
Press the MENU•OK button 5.
Press the
or button 4 repeated-
ly until "AUX OFF" or "AUX ON" appears
on the display.
Press the
or button 4 to switch
AUX ON or OFF.
•
•
쏅
쏅
쏅
After fi nishing the setting,
press the ESCAPE button <.
FRONT-AUX input at the front of
the device
Danger!
Increased risk of injury from con-
nector
In case of an accident, the protruding con-
nector in the FRONT-AUX-IN socket may
cause injuries. The use of straight plugs or
adapters can lead to an increased risk of
injury.
For this reason, we recommend using an-
gled jack plugs, e.g. the Blaupunkt acces-
sories cable (7 607 001 535).
As soon as an audio source is connected to
the FRONT-AUX-IN socket, it can be select-
ed with the SRC button 2. "FRONT AUX"
then appears on the display.
쏅
External audio sources
01_LondonMP48us_gb.indd 2901_LondonMP48us_gb.indd 29 11/20/07 9:56:34 AM11/20/07 9:56:34 AM
To Next Page
Loading...
