19
Lübeck CC22
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES
NEDERLAND
ESPAGÑOL
SVENSKA
FRANÇAIS
Automatically Storing the Stron-
gest Stations (Travelstore)
With Travelstore, you have the opportunity to
automatically store the next five FM stations
of your local reception area and have them
sorted according to their frequencies. This
feature is of special use while travelling.
• Press the FM•T rocker switch A for at
least two seconds.
The set searches for the next FM stati-
ons and sorts them on the “T” (Travel-
store) storage level. Once the process
is finished, the car radio tunes in to the
first station.
If required, it is also possible to manually
store a station on the Travelstore level. If less
than five stations can be received, the free
buttons are represented by dashes for a
short period of time.
Activating a Stored Station
If required, the memorized stations can be
activated at a keystroke.
• Choose the storage level.
For this, press FM•T A until display =
shows I, II or III, or T.
• Briefly press the corresponding preset
button B.
Briefly Sampling a Station
(Radio Scan)
Starting with the currently tuned in station,
you can have the following ones briefly sam-
pled for approx. eight seconds each.
• Briefly press the Scan knob 1.
If the following station is found, it is
reproduced for approximately eight
seconds.The station’s frequency starts
blinking on display 8; if it has already
been memorized, the corresponding
preset button starts blinking on display
9. In addition, the storage level indi-
cator lights up on display =. Subse-
quently, the set starts searching for the
next station.
For selecting a sampled station:
• Press the Scan knob 1 once again.
The Scan function is off.
After the search operation has been conclu-
ded, and no station has been chosen, the
radio starts playing the station from which
Station Scan was started before.
Sampling Memorized Stations
All memorized stations of a waveband can be
briefly sampled.
• Press the PS rocker switch 4.
One after another, the car radio will
then start introducing all memorized
stations of the selected waveband.
The set either samples the stations of
storage levels I-III or of the Travelstore
level “T”. This depends on the current
switching status.
If a preset button has no station alloca-
ted, this button is skipped.
To terminate this function:
• Press the PS rocker switch 4 once
again.
The station currently sampled is
maintained.
To Next Page
Loading...
Need help?
General
