Phone Feature
Phone Feature
Please be aware that using a hand-held phone while
driving is an offence. You can use this device to make
and receive call hands-free. However, it is suggested to
make minimal use of this feature and talk only when
necessary. Talking while driving may divert your
attention from traffic conditions ahead.
Pairing Phone via Bluetooth
To connect your Bluetooth device to the unit, you need
to pair the device to the unit. Pairing needs only to be
done once. You can pair up to ve devices.
1. Turn on the Bluetooth function on the device.
2. Start scanning on the Bluetooth device and select
the unit “NY 750”
3. Enter default password “0000”.
Tip:
Ÿ The operational range between this unit and a
Bluetooth device is approximately 5 meters .
Ÿ Before you connect a Bluetooth device to this unit,
familiarize yourself with the Bluetooth capabilities of
the device.
Ÿ Compatibility with all Bluetooth device is not
guaranteed.
Ÿ Any obstacle between this unit and a Bluetooth
device can reduce the operational range.
Ÿ Keep this unit away from any other electronic device
that may cause interference.
Phone Icon
12
Disconnect Bluetooth Device
To disconnect one device, touch [ ].
After pressed, the unit will display a screen listing
paired devices. Press the [ ] icon to reconnect a
previously paired phone to the BT radio.
Press the [ ] icon to unpair the phone from the unit.
NOTES
Ÿ The device will be disconnected when the device is
moved beyond the operational range.
Ÿ If you want to reconnect the device to the unit, place
it within the operational range.
Ÿ If you do not want to reconnect the device to the unit
automatically, touch [ ], then set [Auto Connect ] to
[ OFF ].
Dialling
After the mobile is paired to the unit successfully, input
a phone number via touch pad and then touch the icon
[Å] to make a call. During dialling, if a wrong number is
input, you may touch the icon [ ] to delete one by one,
or long-press the icon [ ] to delete all, as is shown in
below interface:
To Next Page
Loading...
