Blaupunkt New York 750 - Settings; General; Video; Volume

Settings
Manage all your device settings of your device by a
touch on the 'settings' icon in the main interface. By
default, it will lead you to general settings.
General
Ÿ In general, you nd the following options, which you
can edit as per your preference.
Ÿ Language: Select English
Ÿ Radio region: Select India from option
Ÿ Beep: Turn ON or OFF to suit preference
Ÿ SWC: The following controls are available for most
vehicles:
Touch [Enter], the SWC menu will display.
Up to 12 steering wheel control functions can be
programmed via the built-in SWC interface. Not all
functions may be supported for each vehicle.
1. Before programming, you need to clear / reset the
SWC interface by pressing the [Reset] icon.
2. Dene the functions of the steering wheel controls
by pressing a number 1-12, then press a function
between the available ones. A check mark
corresponding to the number and function will be
displayed. Repeat the confusion until completing all
the steering wheel control functions.
Setting
Note: Dene only the functions available on the
steering wheel.
3. To complete the programming, tap the [Program]
icon. It will then be required to push each button on
the OE wheel (for 1 second), so that the unit can store
the corresponding function.
4. SWC learning / programming is now complete
5. Touch [ ] to exit.
Video
Brightness Mode: Select to adjust screen brightness in
static mode
Brightness: Adjust to increase or decrease overall
screen brightness
Parking: Turn on to allow user to watch videos while
vehicle is in parked condition.
Volume
Adjust each source gain independently to suit
individual preference
Settings
20
1 2 3 4 5 6
Volume + Volume - Mute Next Prev Play
7 8 9 10 11 12
Home Preset + Preset - Band Mode Answer