EasyManua.ls Logo

Blaupunkt New York 750 - Basic Operation; Detect Parking Brake; Power On;Off & Volume; EQ

Blaupunkt New York 750
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Basic Operation
07
Detect Parking Brake
Ÿ Connect the cable "BRAKE" to the parking brake
switch to view video les on the TFT monitor.
Engage the parking brake for viewing videos.
Ÿ When the parking brake is not engaged, the monitor
displays "Warning!!!, Video playback is disabled for
your safety. Engage parking brake to watch video.",
preventing the driver to watch content while
driving. The rear screens are not interested in this
inhibition.
Power On / Off
Press the [ ] button on the front panel to turn the unit
ON. The buttons on the front panel light up and the
current mode status appears on LCD. Press and hold
the button to turn OFF the unit.
Volume Adjustment
To increase or decrease the volume Level, press the [ X ]
on the front panel. The volume range is from "0" to "39".
The TFT screen displays the volume level for 3 seconds.
Audible Beep Conrmation
An audible beep tone conrms each function
selection. The Beep tone can be disabled through the
Setup menu.
Main Interface
After the unit is turned on, touch the icon to enter
the main interface.
1. Apple CarPlayUSB
2. Android Auto
3. Radio
4. Phone
5. AUX-IN
6. USB
7. BT Music
8. EQ
9. Setting
10. Display OFF
1 2
3 4
5 6
7 8
9 10
EQ
The Audio Control feature allows you to easily adjust
yo u r a u d i o s ys t e m to me e t t h e ac o u s t i c a l
characteristics of your vehicle, which vary depending
on the type of vehicle and its measurements. Proper
setting of the Fader and Balance boosts the effects of
the cabin equalizer.
Select Preset Equalizer
1. Enter the EQ setup mode Touch the [ ] icon in the
user interface and the EQ setup interface will display
on the screen.
2. Select EQ mode
Touch the desired EQ selection: BP Sound / Classic /
Rock /Jazz / Country / Pop and the EQ mode will
change.
Adjust EQ Parameters
To adjust EQ parameters, touch and drag the
parameters adjustment bar.
Custom: Set the desired audio effect.
Flat: Select the original audio effect.
Loudness - On/Off: When listening to music at low
volumes, this feature will selectively boost certain bass
and treble frequencies.
Equalizer (EQ) Icon

Related product manuals