12. Enter EQ menu.
13. Choose local or distant seeking mode
14. Favorites
15. Setting to turn On or Off RDS, TA, EON, AF, CT & PTY
function.
16. Closing the options menu.
Select Radio as Playing Source
Open the Source Menu and then touch [Radio].
Select One Radio Band
Swipe the Band switch left and right on the user
interface to select one radio band among FM1, FM2,
FM3, AM1, AM2
Tune radio
Auto Tuning
During auto tuning, the frequency will change in seek
mode.
Touch the [9] / [:] icon on the user interface to tune in
a higher/ lower station. Note: When a station is
received, searching stops and the station plays.
Manual Tuning
Method 1:
Touch and hold [9] / [:] icon on the user interface
more than 1 second to changed in steps higher / lower
station. Repeat the operation to change step by step.
Method 2:
1. Touch the numeric keypad icon [ ]. Numeric
keyboard is displayed, touch number to input
frequency.
2. Touch [ ] to delete the input number step by step.
3. Touch [ OK ] to enter.
Preset Station
The unit has 5 bands, such as FM1, FM2, FM3, AM1,
AM2, and each band can store 6 stations; the unit can
store 30 stations in total
Search Stations Automatically
Touch [ ] to search station and store 6 strongest
stations in current band automatically
Radio
09
Manual Store
1. Tune to a station
2. Touch one of the channels P1 to P6 to save the select
station
Recalling a Station
1. Select a band
2. Touch an on-screen preset button (P1 to P6) to select
the corresponding stored station
Local Seeking
Touch the [ ] icon and choose the Radio Local or
Distance. When the [ Distance ] icon turns bright, only
stations with a strong signal strength will be detected
Default is "Distance".
EQ Selection
Press the [ ] icon and enter the EQ setup
AF Function
Alternative Frequencies Lists are used in conjunction
with the PI code (Program Identication code)to assist
automatic tuning.
Using this information, the radio can automatically
search out another frequency of the same station.
Note
Ÿ During auto switching radio frequency, some
interference may be heard
Ÿ Turning off AF function can settle this problem.
TA Function
The TA (Traffic Announcement) function lets the unit
receive traffic announcements automatically The TA
function can be activated by a TP (Traffic Program)
station broadcasting traffic information When TA is
activated & a traffic announcement is received, the
current playing source will be overridden by the traffic
announcement The unit returns to the original source
after the traffic announcement has been received.
CT (Clock Time)
Some stations broadcast the time and date within the
encoded RDS signal. The clock time is automatically
adjusted when 'CT' is set to 'ON'
PTY Function
PTY is an abbreviation for the type of program dened
by a code to dene the program being broadcast (eg
news or Rock).
The Options of PTY is displayed on the screen To see the
options PTY, tap the scroll bar and arrows on the screen.
When an option is selected PTY (eg News), the radio
unit, the PTY search available If the PTY requested was
not found, the unit returns to the original radio
frequency.
15
14
13
12
16
To Next Page
Loading...
