Blinc BL A2 - Communication and Audio Features; Bluetooth Intercom Setup; Phone Connection and Voice Commands

5
pairing has completed, select the Blinc-A2 in the list of the
devices on your rst Bluetooth device or mobile phone.
Aer the rst Bluetooth device or mobile phone conrms the
pairing has completed and the Blinc-A2 is ready to use for two
Bluetooth devices or mobile phones.
Intercom
The BLINC-A2 can be paired with another headset for Bluetooth
intercom conversaon.
1. Turn on the two Blinc-A2 headsets (A and B) that you
would like to pair with each other
2. Press and hold the “Power” buon of the headset A and
B for 2 seconds unl the LED ashes red and blue alternately.
You will hear a voice prompt saying “pairing”
3. Simply press the “Power” buon in only one headset (it
doesn’t maer that you choose A or B) you will hear a voice
prompt saying “Searching” and wait unl the LEDs of both
headsets turn to blue and intercom connecon is automacally
established, and aer you will hear a voice prompt “Pairing
successful”. Procedure is completed.
If the pairing process is not completed within two minutes, the
Blinc-A2 will return to stand-by mode.
To use Intercom simply press “Power” buon in only one
headset, you will hear “Intercom connected”; if you press
“Power” buon on both headset, intercom will not start.
Connecon with phone
Blinc-A2 will connect with your phone automacally when you
turn on. If Blinc-A2 is turn on, you can simply press “Phone”
buon, it will connect with your phone
Voice Commands
Press and hold “Phone” buon for 2 seconds in stand-by mode
that will start voice commands on your smartphone.
EN