Blinc BL A2 - Call Management; Music Playback Control; Volume Adjustment

6
To redial the last number
Double click the “Power” buon in stand-by mode that will
redial the last number. You will hear a voice prompt saying
“Redialing”.
Answer an incoming call
When you have an incoming call, simply press “Phone” buon
to answer a call, or Blinc-A2 will automacally answer the
incoming call aer 8 seconds.
Reject an incoming call
To reject a call, please double click the “Phone” buon. You will
hear a voice prompt saying “Call rejected”.
Terminate a call
To end a call, please simply press the “Phone” buon when
calling. You will hear a voice prompt saying “Call terminated”
Play/Pause Music
To play music or pause music, simply press “Phone” buon in
stand-by mode.
To track forward or track back
Long Press “Phone” buon about 2 seconds when playing
music, you can rotate “phone” buon to track forward or track
back in 5 seconds, conter-clockwise will track forward, and
clockwise will track back.
Strang and ending Intercom conversaon
1. You can start an intercom conversaon with your intercom
friend by press “Power” buon once.
2. To terminate an intercom conversaon, press “Power”
once again.
Adjust Volume
You can adjust the volume when intercom calling, music
playing, counter-clockwise will increase volume, and clockwise
will decrease volume. Please loudly speak when speaking and
nearby the microphone, otherwise the microphone will stop
EN