Blinc BL A2 - Charging the BLINC-A2; System Reset and Updates

8
seconds, and you will hear a voice prompt saying “Baery low”.
Charging the BLINC-A2
You can charge the Blinc-A2 by connecng the supplied USB
cable into a computer USB port or USB wall charger. LED
indicator shows stable red while the device is charging and LED
indicator turn o when baery is fully charged. It takes about 3
hours to fully charge.
Connecon with other devices.
If you have a standalone Bluetooth device follow the pairing
procedure separately. The procedure is the same as the
procedure of “Mobile phone pairing”
Device update
All Blinc owners get access to free rmware upgrades,
which ensure your Blinc-A2 will be always operang at peak
performance.
System reset
Press once the reset buon to reset the system.
EN