Blix Aveny - Assembly; Unpacking your Blix; Installing Handlebars

5
Step 1: Unpacking your Blix
Step 2: Handlebars
Remove your bike from the box and set it on a
smooth, flat suace. Remove all of the packaging
material from the bike and carefully cut the zip-ties.
Note: We recommend keeping the box and
protective packaging for 30 days aer receiving
your bike in case any issues arise.
Assembly
1. Insert the stem into the fork.
2. Align the center of the handlebars with the center
of the fork.
3. When the stem and fork are pointing forward in
alignment, tighten down the stem bolt.