19
Chapter 6 Connecting to a network
› You will need a network connection for „I nternet radio or „M usic player operation modes “ “ .
› You will need either a router and RJ45 cable or a W-LAN router together with the required pass -
word to establish a connection to your network .
› Your router must have a broadband internet connection for internet radio operation and to
perform software updates .
› When you select and „Internet radio or „Music player mode your device will try to connect to “ “ ,
a network If this is the frst time that a connection has been made or stored networks are not .
accessible then the „Network Wizard will start To start the „Network Wizard manually select, ” . ” ,
the following :
MENU › System settings › Network › Network Wizard
Once started you can enter the following information :
› W-LAN region select a country select a region from the list ( / )
› Network name (select the desired network)
› An encrypted wireless network will require a password .
› Use the navigation buttons or the „CONTROL dial to move the cursor through the displayed ”
characters Press either the „ENTER button or the „CONTROL dial to confrm the selected cha. ” ” -
racter.
› Select „BKSP to delete the last character selected “ .
› Select „C ANCEL to cancel your input. “
› Select „OK“ to confrm the entered code and to try to establish a connection to the selected
network.
› The unit will return to the password entry window if no connection could be made , .
› Under the menu options MENU › System settings › Network › Network Profle you will not be
able to delete desired networks .
Connecting to a network
To Next Page
Loading...
