27
Chapter 10 General functions
Software upgrade
› You can search for a software upgrade manually and can also select under MENU › System set
tings › Software update if the device is to automatically search for updates periodically When a , .
new software version has been found you will be asked if this is to be downloaded and installed , .
All user settings are maintained .
Factory default settings
› Selecting this option resets all settings to a factory default setting Only the software version .
and the registration with the internet radio portal are maintained You can select this option .
under MENU › System settings › Factory reset: .
General functions
Alarm
› You can set two diferent alarm times with the CVR 100 Select in the main menu the option .
ALARM Now you can select the alarm number one or two You can activate or deactivate the. .
„ON OFF this function Set the alarm time Select the option „MODE to select the type of alarm/ “ . . “
to be used e g internet radio Select a memory preset Select the frequency with which the ( . . ). .
alarm function is to be used e g daily once etc Select the alarm signal volume Confrm all ( . . , , .). .
settings with „SAVE An alarm icon can now be seen on display and the alarm will go of at the “.
preset time .
Sleep function
› In the main menu select the menu option „SLEEP to set the sleep timer. Use the „ “ and „ “ , “ S T
buttons to set in 15 minute stages after which the device is to turn of Confrm your selection .
with „ENTER “.
To Next Page
Loading...
