28
Chapter 10 General functions
Language
› Select System settings › Languages to choose a preferred language .
Setting the time
› Select System settings › Time setup to set the time Select „AUTO to activate an automatic time . “
adjustment „Daylight savings determines whether you would like to use a summer or winter. ”
time and with the „Time zone you can select your area s time zone The unit will automatically ” ’ .
be kept up to date from the select source when information becomes available You can also , .
set the date and time manually by selecting „Date Time Setup The format for settings will be / ”.
displayed as follows dd mm yyyy and hh mm AM PM : - - - / .
› The blinking digit indicates the digit feld to be set. Use the navigations buttons to set the time
and date and the „ENTER button to confrm “ .
12/24 hour display
› To select between an 12 and 24 hour display select „S et 12 24 hour to make your selection , / “ .
To Next Page
Loading...
