Block CVR-100+ - Page 21

21
Chapter 7 Internet radio
5. DNS
Now set the primary and secondary DNS address with „ and „ or with the „CONTROL dial “ “ “ . S T
Use the „ u“ and „t“ . “ .buttons to switch between felds Press „ENTER to switch to the next feld
For beyond a network:
6. SSID
Set the wireless network identifcation Use the navigation buttons or the „CONTROL dial to . ”
move the cursor through the displayed characters Press either the „ENTER button or the „CON . ” -
TROL dial to confrm the selected character” .
› Select „BKSP to delete the last character selected “ .
› Select „C ANCEL to cancel your input. “
› Select „OK“ to confrm the entered code and to try to establish a connection to the selected
network.
7. Authentication
Now set the preferred method of authentication .
Open Pre Shared Key PSK WPA Wi Fi Protected Access or WPA2, - ( ), ( - ) .
8. Encryption type
Now select the appropriate encryption type .
Disabled of or WEP Wired Equivalent Privacy for Open or PSK TKIP Temporal Key Integrity ( ) ( ) , (
Protocol or AES Advanced Encryption Standard) ( ).
9. Key
Now enter the code for the wireless network Use the navigation buttons or the „CONTROL dial . ”
to move the cursor through the displayed characters Press either the „ENTER button or the . ”
„CONTROL dial to confrm the selected character” .
› Select „BKSP to delete the last character selected “ .
› Select „C ANCEL to cancel your input. “
› Select „OK“ to confrm the entered code and to try to establish a connection to the selected
network.
Now the device will try to establish a connection using the data previously entered .
4. Gateway address
Set the Gateway address with „ and „ or with the „CONTROL dial Use the „ “ “ “ . u “ and „t“
buttons to switch between fields Press „ENTER to switch to the next field . “ .