Blomberg LWF29441W - Child Lock; Cancelling the Programme; End of Programme; Energy Saving Mode

Washing Machine /User’s Manual
33 / EN
2. Wait until the Loading Door can be opened.
3. Open the Loading Door and add or take out the laundry.
4. Close the Loading Door.
5. Make changes in auxiliary functions, temperature and speed settings if necessary.
6. Press the Start / Pause button to operate the product.
4.6.12 Chld Lock
Use Child Lock function to prevent children from tampering with the product. Thus you can
avoid any changes in a running programme.
C
You can switch on and off the product with On / Off button when the Child Lock is active.
When you switch on the product again, programme will resume from where it has stopped.
To actvate the Chld Lock:
Press and hold 2nd Auxiliary Function button for 3 seconds. In the programme

you can stop pressing on 2nd Auxiliary Function button .
To deactvate the chld lock:
Press and hold 2nd Auxiliary Function button for 3 seconds. In the programme

4.6.13 Cancellng the programme
The programme is cancelled when the product is turned off and on again. Press and hold
On / Off button for 3 seconds.
C
If you press On / Off button when the Child Lock is enabled, the programme will not be
cancelled. You should cancel the Child Lock first.
If you want to open the loading door after you have cancelled the programme but it is not
possible to open the loading door since the water level in the product is above the loading

discharge the water in the product.
4.6.14 End of programme
"End" warning appears on the display when the programme is completed.
If you do not press any button for 10 minutes, the product will turn off automatically.
Display and all indicators are turned off.
Completed programme steps will be displayed if you press On / Off button.
4.6.15 Energy savng mode
If no action is taken for 2 minutes after turning on the product with On / Off button
or after the chosen programme ends, the product will switch to energy saving mode
automatically. The brightness of the indicator lights will decrease. This display will be
dimmed completely if programme time display is available.
If you turn the programme button or touch any button, the lights will switch back to
previous position.
C
This is a feature of this product, and not an error.