Problem Reason Soluton
Product does not switch to
spinning step. (*)
There mght be unbalanced load n the product.
Automatc unbalanced load detecton
system mght be actvated due to the
unbalanced dstrbuton of the laundry
n the product.
The product wll not spn f water s not draned
completely.
Check the flter and the dranng hose.
Excessve foam mght have occurred and
automatc foam absorpton system mght have
been actvated due to too much detergent usage.
Use recommended amount of
detergent.
Washing performance is
poor: Laundry turns
Grey. (**)
Insuffcent amount of detergent has been used
over a long perod of tme.
Use the recommended amount of
detergent approprate for water
hardness and the laundry.
Washng was made at low temperatures for a
long tme.
Select the proper temperature for the
laundry to be washed.
Insuffcent amount of detergent s used wth
hard water.
Usng nsuffcent amount of
detergent wth hard water causes the
sol to stck on the cloth and ths turns
the cloth Grey n tme. It s dffcult to
elmnate Greyng once t happens.
Use the recommended amount of
detergent approprate for water
hardness and the laundry.
Excessve amount of detergent was used.
Use the recommended amount of
detergent approprate for water
hardness and the laundry.
Washing performance is
poor: Stains persist or the
laundry is not whitened. (**)
Insuffcent amount of detergent s used.
Use the recommended amount of
detergent approprate for water
hardness and the laundry.
Excessve laundry was loaded n.
Do not load the product n excess.
Load wth amounts recommended
n the "4.6.2 Programme and
consumpton table".
Wrong programme and temperature were
selected.
Select the proper programme and
temperature for the laundry to be
washed.
Wrong type of detergent s used.
Use orgnal detergent approprate for
the product.
Excessve amount of detergent was used.
Put the detergent n the correct
compartment. Do not mx the
bleachng agent and the detergent
wth each other.