BluDot Strut Table User Manual

Strut Table
DESIGNED IN 2005
ASSEMBLY NOTES | REV 02
NEED A HAND?
Contact us at service@bludot.com or
844.425.8368 for assistance.
A DESIGN WORTH KNOCKING OFF. (AHEM...)
Structure and design are on with the Strut. A proud stance for any
gathering. Conferencing for eight, dining for six, or a power desk for one.

BluDot Strut Table Specifications

General

Brand	BluDot
Model	Strut Table
Category	Indoor Furnishing
Language	English

Summary

Parts & Hardware

Assembly Steps

Step 01: Attach Leg Plates

Attach leg plates to the legs using the provided hardware as shown.

Step 02: Attach Leg Support

Place the top panel face down and attach the leg support using provided hardware. Do not fully tighten.

Step 03: Secure Legs

Secure legs using the provided hardware. Tighten bolts from the previous step.

Step 04: Install Floor Glides

Attach floor glides to the legs. Get assistance to lift and turn the table upright.

Step 05: Adjust Floor Glides

Adjust floor glides by rotating them for leveling. Periodically tighten bolts.

Additional Information

Cleaning Instructions

Clean with a damp cloth. Use furniture cleaner for fingerprints and wipe dry.