VISION
D R I V ERS HANDB O O K
26
Flare Kit
If the bus is equipped with a flare kit, on most VISION buses it is typically mounted on
the floor behind the Driver’s seat and left side seat barrier. The location may differ
according to state specs. The kit contents should be inventoried every 30 days, or
as required by your state and local regulations. The mounting fasteners should be
checked monthly to ensure security.
Fire Axe and Crowbar
If the bus is equipped with fire axe and/or crowbar options, on most VISION buses
they are typically mounted on the floor behind the Driver’s seat and left side seat
barrier. The location may differ according to state specs. The Fire axe cutting edge is
covered by a metal plate when mounted.
Crowbar mounting latch
To Next Page
Loading...
