Blue Clean AR 112 S User Manual (English)

Questions and Answers:

R
Reginald ArnoldAug 7, 2025
What to do if the high pressure hose will not connect to the spray gun on my Blue Clean AR 112 S Pressure Washer?
- A
  Anthony LynchAug 7, 2025
  If the high pressure hose won't connect or stay connected to the spray gun on your Blue Clean Pressure Washer, the rubber sleeve covering the fitting at the end of the high pressure hose has likely slipped up toward the metal tip. Wiggle, twist, and/or pull the rubber sleeve down until the entire tip is visible plus an 1/8 in. of the metal fitting below the tip. Now try to insert the hose tip into the spray gun. It should 'click' into place. Do not push in the release button when connecting the high pressure hose. If you are unable to move the sleeve down, you may carefully cut away the end of the sleeve with a sharp knife, being careful not to cut or puncture the hose.
S
Seth VegaAug 18, 2025
What to do if my Blue Clean Pressure Washer is running but there is no water flow?
- L
  lopezrobertAug 18, 2025
  If your Blue Clean Pressure Washer is running but there's no water flow, first check the water source. Then, unclog the nozzle on the lance, referring to the nozzle cleaning instructions. Alternatively, remove the lance and spray directly from the spray gun to determine if the issue lies with the lance. Also, reconnect the QC Garden Hose Adapter to the clear quick connect.
T
Teresa StanleyAug 27, 2025
Why is water leaking where the high pressure hose connects to the spray gun on my Blue Clean AR 112 S Pressure Washer?
- M
  Michelle ParkerAug 27, 2025
  If water leaks where the high pressure hose connects to the spray gun of your Blue Clean Pressure Washer, make sure there is an o-ring at the end of the metal tip of the high pressure hose. O-Ring Kits are available online.

Blue Clean AR 112 S Specifications

General

Brand	Blue Clean
Model	AR 112 S
Category	Pressure Washer
Language	English

Summary

Product Specifications

Package and Hardware Contents

Package Components

Lists and illustrates all included parts like the spray gun, hose, and lance.

Hardware Components

Details included hardware such as screws and O-rings, noting their location.

Safety Information

Safety Symbol Definitions

Explains symbols like DANGER, WARNING, and CAUTION for potential hazards and injuries.

Operational Safety Guidelines

Provides essential precautions for safe operation, including area clearance and footing.

Hazard Prevention and Safe Usage

Details risks like high-pressure spray, electrical hazards, and proper use of accessories.

Double-Insulated Appliance Safety

Explains GFCI protection and the principles of double insulation for user safety.

Preparation for Assembly

Assembly Instructions

Power Unit Assembly

Details installing the handle onto the power washer unit using screws.

Spray Gun Holster Attachment

Describes sliding the spray gun holster onto the power washer unit without screws.

Cord Hook Installation

Instructions for sliding the cord hook onto the right side of the power washer unit.

High Pressure Hose Connection

Guides on screwing the high-pressure hose to the power washer unit and spray gun.

Spray Gun Hose Securement

Explains connecting the high-pressure hose to the spray gun by inserting and confirming a "click".

Spray Gun Hose Release

Details how to release the high-pressure hose from the spray gun using the button.

Spray Gun Trigger Lock

Explains how to lock the spray gun trigger for safety and storage.

Extension Lance Installation

Guides attaching and locking the extension lance to the spray gun.

Variable Nozzle Lance or Detergent Bottle Attachment

Describes inserting the variable spray nozzle lance or detergent bottle into the extension lance.

Detergent Bottle Setup and Use

Instructions for preparing the detergent bottle and using detergents safely and effectively.

Detergent Bottle to Lance Connection

How to connect the detergent bottle securely to the extension lance.

Garden Hose Adapter Installation

Details installing the quick connect adapter to the power washer's water inlet.

Garden Hose to Adapter Connection

Explains attaching the garden hose to the quick connect garden hose adapter.

Garden Hose Connection to Unit

Guides connecting the garden hose adapter to the power washer's water inlet.

Operating Instructions

Water Supply and Power Connection

Steps for turning on the water supply, connecting the power cord, and setting the ON/OFF switch.

Spray Gun Priming and Operation

How to release the safety lock, prime the gun by squeezing the trigger, and start pressure washing.

Trigger Operation and Auto Start Feature

Explains how to use the spray gun trigger for washing and the auto start feature's behavior.

Surface Cleaning Techniques

Provides guidance on avoiding surface damage by adjusting spray angle and distance.

Variable Nozzle Adjustment

Details how to adjust the spray pattern and intensity using the variable spray nozzle.

Care and Maintenance

Detergent Usage and Application

Guidelines for using approved detergents, their consistency, and proper spraying technique.

Cleaning the Quick Connect Adapter

Instructions for cleaning the screens inside the quick connect adapter with water.

Nozzle Cleaning and Maintenance

How to clean clogged nozzles using the provided wire or a paper clip for optimal performance.

Storage and Winterization

Steps for proper storage, including draining, unplugging, and protecting the unit from freezing.

Pump Saver Application

Instructions for using a pump saver product to protect the pump during storage.

Troubleshooting

Unit Not Turning On

Addresses issues with the GFCI connection, extension cords, and power switch.

High Pressure Hose Connection Issues

Solutions for the high-pressure hose not connecting or staying connected to the spray gun.

No Water Flow

Troubleshooting steps for when the unit runs but there is no water flow.

High Pressure Hose Leaks

Diagnoses and fixes for water leaks at the high pressure hose connection to the spray gun.

Lance Removal Difficulty

Methods for removing the lance from the spray gun when it gets stuck.

Auto Start Feature Behavior

Explains the power washer turning on briefly and then off, and how to start it.

Limited Warranty

Warranty Terms and Conditions

Details the one-year bumper-to-bumper warranty, its coverage, exclusions, and consumer application use.

Warranty Claim Process

Outlines steps for making a warranty claim, including contacting customer service and obtaining an RMA.

Replacement Parts List

Related product manuals

Blue Clean AR 112 S User Manual

Table of Contents

Questions and Answers:

Blue Clean AR 112 S Specifications

Summary

Product Specifications

Package and Hardware Contents

Package Components

Hardware Components

Safety Information

Safety Symbol Definitions

Operational Safety Guidelines

Hazard Prevention and Safe Usage

Double-Insulated Appliance Safety

Preparation for Assembly

Assembly Instructions

Power Unit Assembly

Spray Gun Holster Attachment

Cord Hook Installation

High Pressure Hose Connection

Spray Gun Hose Securement

Spray Gun Hose Release

Spray Gun Trigger Lock

Extension Lance Installation

Variable Nozzle Lance or Detergent Bottle Attachment

Detergent Bottle Setup and Use

Detergent Bottle to Lance Connection

Garden Hose Adapter Installation

Garden Hose to Adapter Connection

Garden Hose Connection to Unit

Operating Instructions

Water Supply and Power Connection

Spray Gun Priming and Operation

Trigger Operation and Auto Start Feature

Surface Cleaning Techniques

Variable Nozzle Adjustment

Care and Maintenance

Detergent Usage and Application

Cleaning the Quick Connect Adapter

Nozzle Cleaning and Maintenance

Storage and Winterization

Pump Saver Application

Troubleshooting

Unit Not Turning On

High Pressure Hose Connection Issues

No Water Flow

High Pressure Hose Leaks

Lance Removal Difficulty

Auto Start Feature Behavior

Limited Warranty

Warranty Terms and Conditions

Warranty Claim Process

Replacement Parts List

Related product manuals