To Next PageTo Next PageHow to turn on my Blue Clean AR 383 S?
To get your Blue Clean Pressure Washer to turn on, ensure the GFCI module on the power cord is plugged directly into an outlet, avoiding extension cords. Also, verify that the power switch is turned on while the GFCI is connected.
Why is my Blue Clean Pressure Washer running but there is no water flow?
If your Blue Clean Pressure Washer is running but no water is flowing, first check the water source. Then, try unclogging the nozzle on the lance. If that doesn't work, remove the lance and spray directly from the spray gun to see if the issue is with the lance itself. Finally, ensure the QC Garden Hose Adapter is correctly reconnected to the clear quick connect.
Why is my Blue Clean AR 383 S leaking water at the hose connection?
If water is leaking where the high pressure hose connects to the spray gun of your Blue Clean Pressure Washer, ensure there's an o-ring at the end of the metal tip of the high pressure hose. O-Ring Kits are available online.
What to do if my Blue Clean AR 383 S turns on for 2 seconds then shuts off?
If your Blue Clean Pressure Washer turns on for a couple of seconds and then shuts off, it might be priming the pump. Try turning the power switch off, holding the trigger on the spray gun to get a steady water stream, and then turning the power switch back on while still holding the trigger.
General| Brand | Blue Clean |
|---|---|
| Model | AR 383 S |
| Category | Pressure Washer |
| Language | English |
Lists specific warnings for safe operation of the pressure washer.
Guides on connecting the high-pressure hose to the unit and spray gun.
How to operate the power switch, spray gun trigger, and adjust the high/low nozzle.
Instructions for filling and using the detergent tank for cleaning tasks.
Guidance on controlling pressure and angle to avoid damaging surfaces.
Steps for proper storage, including draining and protecting the unit.
Addresses issues with the unit not powering on.
Explains the unit's auto-start feature and how to properly power it on.
