Blue Clean AR 1850 User Manual (English)

Questions and Answers:

J
Jason GarciaAug 4, 2025
Why high pressure hose will not connect to Blue Clean Pressure Washer spray gun?
- P
  patriciamendozaAug 5, 2025
  If the high-pressure hose won't connect or stay connected to the spray gun of your Blue Clean Pressure Washer, it might not be a spray gun problem. The rubber sleeve covering the fitting at the end of the high-pressure hose may have slipped up. Wiggle, twist, and pull the rubber sleeve down until the entire tip is visible, plus an 1/8 inch of the metal fitting below the tip. Also, make sure you are not pushing the release button when connecting the high-pressure hose.
N
nbautistaAug 12, 2025
What to do if Blue Clean AR 1850 Pressure Washer turns on then off?
- L
  loricollinsAug 12, 2025
  Your Blue Clean Pressure Washer may turn on for 1-2 seconds to prime the pump, then automatically shut off, waiting for the spray gun trigger to be pressed. When you press the trigger, water should start flowing through the pump. If this doesn't happen, turn the power switch off, hold the trigger on the spray gun, and ensure you have a steady stream of water.
J
Jeffrey WoodAug 19, 2025
Why is my Blue Clean AR 1850 leaking at the hose connection?
- C
  Carl HardySep 12, 2025
  If water is leaking where the high-pressure hose connects to the spray gun on your Blue Clean Pressure Washer, ensure there is an o-ring at the end of the metal tip of the high-pressure hose. The connection will leak if the o-ring is missing.
A
Anthony JimenezAug 27, 2025
What to do if Blue Clean AR 1850 runs but no water flows?
- A
  Angela CurtisAug 27, 2025
  If your Blue Clean Pressure Washer is running but no water is flowing, first check the water source. Make sure the power is off until water comes through the spray gun. Also, check the garden hose adapter for loose connections and debris in the filter. Try ejecting the nozzle from the lance to see if the clog is coming from the nozzle. Additionally, remove the lance and spray directly from the spray gun to test the water flow.