To Next PageTo Next PageHow to fix a Blue Clean Pressure Washer that won't turn on?
If your Blue Clean Pressure Washer won't turn on, make sure the GFCI module on the power cord is plugged directly into an outlet and that the power switch is on. Avoid using an extension cord.
What to do if Blue Clean AR 2N1-Q Pressure Washer turns on for seconds then shuts off?
If your Blue Clean Pressure Washer turns on briefly and then shuts off, it may not be defective. When the water is connected, the accessories are properly assembled, and the power is on, it might turn on for a short time to prime the pump. It then automatically shuts off, waiting for you to press the spray gun trigger. Water will flow through the pump when you press the trigger. To reset the unit, turn the power switch off, hold the trigger on the spray gun to ensure a steady water stream, and then turn the power switch back on while still holding the trigger.
Why is my Blue Clean AR 2N1-Q Pressure Washer not spraying water?
If your Blue Clean Pressure Washer is running but no water is coming out, ensure that power is NOT on until water flows through the spray gun. Check the water source and garden hose adapter for a loose connection, and inspect the filter for debris. Try ejecting the nozzle from the lance to see if the clog is coming from the nozzle. You can also remove the lance and spray directly from the spray gun.
General| Brand | Blue Clean |
|---|---|
| Model | AR 2N1-Q |
| Category | Pressure Washer |
| Language | English |
Lists all parts included in the pressure washer package.
Details all hardware components provided for assembly.
Essential safety warnings and precautions for operating the pressure washer.
Information on GFCI protection and double-insulated appliance servicing.
Steps to take before starting the assembly process.
Instructions for assembling the lower frame and wheels.
Guide for attaching the handle and nozzle holder.
Instructions for connecting the spray gun, lance, and hose.
How to lock and unlock the spray gun trigger for safety.
Steps for securely attaching the extension lance.
Attaching nozzles, foam cannon, or rotary nozzle to the lance.
Connecting the high-pressure hose to the unit and spray gun.
Guidance on connecting the garden hose to the unit.
Procedures for turning the power washer on and off correctly.
Proper use of the spray gun trigger for operation and safety.
How to fill and use the detergent tank and soap nozzle.
Instructions for filling and using the foam cannon with detergent.
Steps to detach the power washer unit from its frame for handheld use.
Useful tips for efficient operation and maintenance during use.
Techniques to prevent damage to surfaces being cleaned.
Instructions for using and storing the power cord.
Procedure to clean the screen inside the garden hose adapter.
How to clean clogged or partially clogged spray nozzles.
Guidelines for storing the pressure washer after use.
How to use Pump Saver to protect the pump during storage.
Corrective actions for when the unit fails to power on.
Solutions for problems related to water flow or pressure.
How to address leaks at the high-pressure hose connection.
Troubleshooting the unit turning off after a short period.
Information on the product's two-year limited warranty coverage.
Steps for initiating a warranty claim and contacting customer service.
List of available replacement parts with corresponding part numbers.
