2
7
6
1
8
9
4
3
5
D
Pump
Hose
Garden Hose Adapter
Reset
Package content:
1. Pressure Water Unit
2. Manual
3. Adjustable Spray Nozzle
4. Turbo Nozzle
5. Gun
6. Nozzle Cleaning Tool
7. High Pressure Hose
8. Garden Hose Adapter
9. Quick Connect Filter
Gun Safety Button (D)
1
2
2. Install with supplied
screws. Tools needed 1
phillips screwdriver.
3
5. a) Insert lance into the
gun by turning clockwise at
the same time.
b)Turn counterclockwise
to remove.
4. a) Remove shipping cap
from gun.
b) Screw high pressure
hose to gun.
4 5
7
8
6. a) Remove shipping
cap from front of pres-
sure washer.
b) Attach Quick
connect filter to front of
washer.
c) Attach garden
hose adapter to the gar-
den hose.
d) Snap garden
hose adapter and filter
together.
Trigger
Gun Safety
Tab
7. Activate the lock by
holding the gun and push
the lock from left to right.
Squeeze trigger to make
sure the trigger does not
move. The safety trigger
lock should be locked at
all times when pressure
washer is not in use.
9
8. a) Plug the power cord
into a grounded 120V outlet
and press the reset button as
shown.
b) THIS MUST BE DONE
EACH TIME THE UNIT IS
PLUGGED IN AN OUTLET.
Pressure Washer Quick Guide
Assembly OperAtiOns
ar390
9. Pull trigger then turn on
power switch located on front
of the washer.
10. Spray pattern shape
and intensity can be
changed by twisting the
spray adjuster at the
end of the lance. KEEP
HANDS CLEAR OF THE
FRONT OF THE LANCE
TO PREVENT INJURY.
NOTE: Turbo nozzle is
not adjustable.
6
3. Press hose reel handle
into place until you hear a
snap.
0 (off)
I (on)
10
To Next Page
Need help?
General
