Blue Robotics BlueROV2 - Cable Routing

5/20/2019 BlueROV2 Heavy Configuration Retrofit Kit Installation - Blue Robotics
https://www.bluerobotics.com/learn/bluerov2-heavy-configuration-retrofit-kit-installation/ 26/28
(https://www.bluerobotics.com/wp-content/uploads/2019/03/joystick-stick-mode.png?x62571)
These functions can be assigned to buttons on the joystick in the Joystick tab of the Vehicle Setup menu. The roll and
pitch inputs are cleared when switching to MANUAL mode. They are NOT cleared when disarmed.
Navigation
Introduction
Parts and Tools
BlueROV2 Partial Disassembly
Install New Thrusters
Install New Electronics
Install New Thruster Guards
Reassemble BlueROV2 Electronics
Enclosure
Cable Management
Install New Buoyancy Blocks and
Fairings
Mounting Additional Ballast to the
Frame
Privacy - Terms