Slightly and slowly unscrew the Blue Connect (maximum ½ turn) to remove any air. As soon
as the water comes out, it means that there is no air left in the pipes, and you can then tightly
screw Blue Connect again.
In “Settings“ » “Blue Connect“, activate the Blue Fit50 option.
Winterization procedure
Unscrew the Blue Connect.
Seal the hose clamp with the cap provided in the Blue Fit50 box.
Activate the Internet (Wi-Fi or 4G) and Bluetooth® on your smartphone.
Note: Stay close to the device throughout the whole standby mode process.
6.
7.
1.
2.
3.
To Next Page
Loading...