Storage:
If you need to take Blue Connect out of the pool for more than an hour, screw it on storage cap with
KCI (saturated potassium chloride), pH4, or as a last resort, pool water as the probe should not be
left dry.
D. Activating Blue Connect after winterization
In “Settings“ » “Blue Connect“, activate the device.
See “Blue Connect installation“ from point 2.
Technical characteristics
» Dimensions: 253 mm x 96 mm
» Weight: 714 g
» Protection standard: IPx8 standard
» Sensors and measurements:
pH: Measurement range: 0 to 14
Accuracy: ± 0,1
Resolution: 0,1
Temperature (water): Measurement range: 5 to 50°C
Accuracy: ± 0,2°C
Resolution 0,1° C
Redox/ORP (active chlorine): Measurement range: 0 à 999 mV
Accuracy: ± 20mV
Resolution 1mV
Conductivity: Measurement range: 250 to 15.000 μS/cm
Accuracy: ± 10 %
Resolution 1uS/cm
» Connectivity: Sigfox®, Bluetooth Low Energy® (BLE)
» Power supply: 1 Lithium battery (thionyl chloride)
» Nominal voltage: 3,6 V
» Operating system: iOS, Android™ (4.0 Bluetooth®, Android™ 4.3 and iOS 9.0)
» Languages: English, French, Spanish, Dutch, German, Italian, Portuguese.
» Territorial compatibility: EU: 868 MHZ
US/AU: 902 / 920 MHZ
1.
2.
To Next Page
Loading...