Description of the equipement
Blue Connect analyser: Delivered secured on the storage cap to
protect the probe during transportation. The probe is immersed in KCI
(saturated potassium chloride), which assures its protection.
The storage cap: Used to transport the probe out of the water or to
keep the sensors immersed during an extended storage (in winter
for example).
The usage cap: Must always be mounted on the device before placing
it in water. It protects the sensors from any damage.
Cord: Allows to x the device to a point of attachment.
Quick start guide: Helps you with the device start-up .
To Next Page
Loading...
